Li HuaWei
msgbartop
People, even more than things, have to be restored, renewed, revived, reclaimed and redeemed. Never throw out anybody!
msgbarbottom

22 Oct 08 Wireless speed Knowledge

无线速率知识:

802.11  :  速率最高2Mbps。(802.11是一个无线的标准)
802.11b :  速率最高11Mbps,向下兼容802.11。
802.11b+:  速率最高22Mbps,向下兼容802.11/b。
802.11g :  速率最高54Mbps,向下兼容802.11/b。
802.11g+:  速率108Mbps及更高,向下兼容802.11/b/g。
802.11a :  速率最高54Mbps,不兼容,必需和支持802.11a的产品才能联网。
802.11g或802.11g+在进行远距离传输时同样使用的是802.11b标准。
802.11n :  速率最高600Mbps 新增多入多出技术 (MIMO), 这是一种信号处理和智能天线技术,可通过多个天线传输多数据流。此项新标准应该要比802.11b快上50倍。是目前最先进的无线传输标准。

而目前的802.11b远距离无线网桥(1公里以上,802.11b能扩36公里)仍是市场的绝对主流,就是因为对于远距离传输,以目前的WLAN技术水平,能稳定连接是最重要的,而远距+高速度仍是需要技术突破的。

Tags:

07 Sep 08 如何创建一个无线网络

英文原文:How to Create a Wireless Network

计算机网络是一个巨大方式与其他计算机用户合作在您的家或办公室。 当变得越来越容易对基本的计算机用户时,它可能仍然是许多人民的困难,令人沮丧的经验。

首先:

了解在镇范围内无线宽频(IEEE 802.16/WiMAX)和家无线网络(IEEE 802.11)之间的区别。 这篇文章仅应付一般叫作不要求订阅的WiFi的后者(、屋顶天线,屋顶登上的盘)。 无线路由器不同地叫作门户、访问接入点、发射机、插孔和开关。 他们通常是外部,并且叫作这篇文章的路由器。 亦称无线适配器是调制解调器或接收器,并且可以是内部或外在的。

安装:

  1. 如果买的路由器和适配器分别地,保证您的无线路由器至少是一样新的象您的无线适配器,以便他们使用适合标准(叫作802.11a、802.11b、802.11g和802.11n)。 对于最大兼容性选择三方式或双重方式的802.11b/g标准。
  2. 如果您不使用Windows XP,检查司机为无线适配器的芯片组是可利用的您操作系统的,在您买之前。

设定您新的路由器:

  1. 如果您想要通过一个无线路由器分享宽频连接,塞住新的无线路由器入您的互联网连接点(过滤器或分离机,如果ADSL,直接地到电话插口里,如果DSL)
  2. 如果您有一,首先起动您的宽频连接和现有的外部调制解调器(等待所有光返回到法线)。
  3. 塞住您的路由器入您的与以太网电缆的个人计算机
  4. 其次起动您新的无线路由器(等待它充分地开始)。
  5. 去您的互联网浏览器并且键入http://192.168.0.1 (Belkin), http://192.168.1.1(TP-Link), http://192.168.1.1 (Linksys), http://192.168.2.1 (其他)并且输入您的您的路由器的用户名和密码(经常这是“admin”用户名的和“admin”或“密码”密码的)
  6. 使能无线能力(SSID)并且输入您的用户名和密码被给您由您的网络服务提供商。
  7. 选择WPA (或WEP,如果您的卡片不可能处理WPA)安全并且进入passkey并且写下它。

查出您的无线适配器:

  1. 注意制造商,并且您的无线适配器模型然后塞住它入您的个人计算机。
  2. 如果您操作系统不认可无线适配器从来自与适配器或的所有圆盘然后得到司机,出故障那,互联网。
  3. 在Windows XP,在.inf文件的任一用鼠标右键单击和点击安装或者进入设备管理程序并且更新在未知的设备的司机。
  4. 一旦Windows XP认可您的无线电设备它应该出现于网络连接和提供您路由器选择连接到在范围之内。

连接到网络:

  1. 选择您的路由器(通常制造商名字aka SSID),安全方法并且进入passkey为了连接到它。 使用自动DHCP,除非指示。
  2. 这应该发现无线路由器(点击刷新,直到它)和连接到网络通过新的路由器。

技巧:

  • 分享文件(或保证您的计算机真正地网络)并且/或者在Windows XP的一台打印机,要求在所有计算机上和文件分享使能的印刷品。
  • 在Windows XP或景色,去开始>控制板>网络连接(点击“对经典看法的开关”,如果您看不到网络连接象) >在您分享为微软网络>点击的本地区域的连接以太网适配器>物产>检查文件和打印机的用鼠标右键单击“好”
  • 在Mac OS X,点击在目录杆的苹果计算机公司菜单并且点击“系统特选…”。 然后,点击“分享”。 然后您可以选择为服务您在您的无线网络想要分享。 对于进一步支持,点击分享的苹果计算机公司支持页链接在您的无线网络。 分享支持的苹果计算机公司
  • passkey不是相同的象一个十六进制键
  • 警告:

  • 起动您的设备按错误顺序能造成您新的设定不运作! 请务必通电每个项目按顺序。 它真正地事关。
  • 记住设定您的安全设置防止对您的网络的越权存取。 WPA加密比WEP安全。
  • 并且记住改变在您的无线路由器的默认密码和用户名。 许多wardrivers在发现热点然后尝试那种访问接入点的缺省代码附近将移动。 这能导致您得到锁在您自己的路由器外面并且必须manualy重新设置您的网络。
  •  您将需要的事:

  • 1台无线适配器或调制解调器或者接收器(内部或外在)
  • 仅必要1个无线的访问接入点或的路由器或者的发射机或者的插孔或者的开关(总是外部)您是否需要做更多比沟通在二台个人计算机之间在您的房子里。
  • 写下您的密码的纸(pens too)
  • Tags:

    12 Aug 08 Antenna gain higher dBi

    Some friends inquire frequently, how wireless router’s signal that does miss, cannot pass through the wall. What wireless Router signal buys to be best?

    Whether actually the wireless product can realize the long-distance range signal to transmit stably, besides with agreement, wireless module and design related, antenna’s function similarly cannot neglect. Trades a high gain the antenna to trade a performance better router to be simpler than convenient, the cost is not too high, therefore is the promotion way which most is worth recommending. Certainly, this wants your router to support the dismantable antenna.but the antenna also has and the equipment (Router /AP/ network card) the compatibility.

    Because the router and the network card amount of power and so on this aspect’s factor signal the building construction network environment has the relations.

    Antenna’s two key parameters:

    The antenna has two parameters to be essential: Gain and directivity. The gain expressed that the antenna power enlargement factor, the value bigger expression signal’s enlargement factor is bigger, i.e. works as the gain value to be bigger, the signal is stronger, the transmission quality is better. What the directivity refers to is the antenna radiation and receives whether to have the direction, namely antenna whether to come to some angle the signal is specially keen and the radiating capacity whether to concentrate in some angle.

    The antenna has the different radiation or receptivity to the spatial different direction, this is antenna’s directivity. According to the directive difference, the antenna has omnidirectional and the directional two kinds, but each kind of antenna’s application domain is different, because of each has its strong points.

    Omni directional antenna: The weight antenna directivity usual use directional diagram, in the horizontal plane, the radiation and the receive does not have the most general orientation the antenna to be called the omni directional antenna. Because omni directional antenna tropism with an improper method, therefore multipurpose in spot to multi-spot correspondence zone center. If builds the wireless network between the identical building or great distance very near building, is quite suitable to select increases the omni directional antenna high.
     
    Directional antenna: Some or the many radiations and the receptivity most general orientation’s antenna is called the directional antenna. The directional antenna energy is centralized, the gain relatively omni directional antenna must be high, suits in the long-distance range point-to-point communication, because simultaneously has the directivity, antijamming ability is quite strong. If for example, an enterprise needs to surmount several buildings or the block builds the wireless network, then suits provides the high gain directional antenna.
     
    Gain: The gain is one of antenna’s major technique targets, it is the directive coefficient and the efficiency product, is the antenna radiation or the receive electric wave size performance. Puts briefly, under the same level condition, antenna’s gain value is higher, the directivity is also bigger, the covering scope is also broader.
     
    attention:
     
    For the wireless signal’s expansion, some users like replacing the high gain the antenna. Because the antenna is the passive component, will not increase the power, no matter will add the big gain the antenna, it will launch the power will not be higher than 50mw, the emissive power will mainly be decided by the launch hot spot, namely wireless router, wireless AP itself, if the launch hot spot itself power will be small, then has traded the high gain antenna, the effect will not be obvious.

    Tags:

    12 Aug 08 如何改善Wi-Fi接收信号

    在2005年6月最远的的WiFi连接纪录创下了125英里。 这个距离大概是在您的需要之外时,最大化您的信号强度和减到最小无线干扰的一些快的技巧。

    1. Put 大的家具沿着外面墙壁 of 你家.
    2. 使镜子减到最小。 所有金属表面会反射WiFi信号,包括在多数镜子找到的稀薄的金属层数。
    3. 在以下地点之一中安置您的路由器:
      • 在房子附近比较高的中心。
      • Off the floor, 理想地说在一个高架子上。
      • 尽可能的从您的邻居的Wi-Fi路由器(哪些,当然,您保证了使用一种不同的频道)。
      • 远离无线电话和微波, which operate on the same 2.4-频道。
      • 保留天线一样很远从电源线和其他计算机导线尽可能。 那些灯芯绒裤和导线可能干涉无线电信号接收。

    技巧:

  • 计算机箱他本身可以是一个重大障碍到Wi-Fi信号- 尝试定位机箱所以他不能在网卡和路由器天线之间.
  • 增加一个”高增益天线” (更高的dBi) 外部天线的加法经常将提供增加接收无信信号和性能。 注意一更高的dBi水平地增加信号,但是垂直减少。 如果您需要盖几个地板,一更高的dBi大概不会帮助。 在这种情况下,您也许考虑买Wi-Fi放大器,将促进您的信号。 
  • 反射器可能也使用到好好处。 使用NetStumbler调整您的反射器的安置。 可以使用雷射唱片,象能实际上看起来象一台抛物面反射器的任何。 应该在接受设备或天线之后安置反射器,当然。 在信号强度的大增量可以期望。 这个把戏也与手机一起使用。 
  • 如果所有发生故障,您能调查购买WiFi中继器,是硬件片断您能使用促进在路由器和您的设备之间的信号。
  • 根据无线路由器您的品牌和型号, 在软件可以能用增加更多能力和选择增加力量到您的无线天线的替换开源固件刷DD-WRT。
  • 如果您仍然需要更远的范围,考虑升级您的无线标准,由与MIMO的草稿N (未发布规则N)或无线G决定。 这两技术以前很大地将增加一个802.11g或802.11b网络的范围。
  • 注意:

    • 如果您刷路由器的固件DD-WRT,它也许使您的保修无效。
    • 如果您转动力量太…而兴奋的一个修改过的无线路由器它也许遭受永久损坏。

    英文原文参考:Boost Your Wi-Fi

    Tags: ,